Door Handle Replacement
Door handles appear to be something minor but if you aren't happy with the style or design of them, or find them difficult to use then it's time to replace them. Installing the new handle on your door is simple if you have patience.
The majority of modern door handles come with cover plates that conceal the screws to create a stylish appearance. However, you will need to attach them separately if the new handle does not already have them.
Take off the handle from the old one.
Door handles aren't just an essential for aesthetics of your home but they're also crucial for safety as they allow you to lock and unlock your door. Over time the door handle could start to lose its grip or feel loose. It could be beginning to appear aged and worn. This is a sign that it's probably time for a replacement.
If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means that you can not lock or unlock your door, which could pose an security risk to you and your family.
It's also an excellent idea to replace the handle on your door if it is damaged or broken. A damaged or broken door handle can be quite dangerous, especially in the event that your children or senior family members are unable to open it and end up trapped within. Luckily, it's quite easy to fix a broken door handle by replacing the old one.
Most modern door handles are standard size and therefore will fit on any door. If you aren't certain that the new door handle you are buying will work, take out the old one and measure its housing holes. This will let you purchase the right size door handle.
The most straightforward method to remove the handle from your door is to unscrew it from the door. This is usually done with the screw driver. However, some door handles have a cover plate that conceals the screws that mount them, so you'll have to cut off this to reach the screws underneath. After removing the old handle, take note of the way the spindle is attached. This will help you align the new handle.
You can also remove the door handle by removing the latch mechanism. You can use a screwdriver to remove the door handle. However, you'll need to locate the small latch, which is located on the edge cut piece. After you have removed the latch, take off the handle and the strike plate. Then remove the latch from the door's edge.
Remove the Strike Plate
If you are replacing the handle, you'll need to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The package the new handles arrive in will have two latch plates - a rectangular one and circular (see the diagram above for the parts of the door handle). If your current latch plate has rectangular, swap it to a round one, so that the latch hooks into the strike plate in a manner that makes the handle easier to use.
The first step is to unhook the screw that is holding the latch plate. These screws are often tight and will require some force to loosen. It may be helpful to have a second person help with this part if possible.
Once the screws are removed and the latch plate will slide out of the door easily. If the latch plate is stuck or refuses to move, use a small hammer to scrape the edges. This may help free the plate.
Now, you can proceed to preparing the new door strike plate for installation. Using the screws made of wood that came with your new handles, attach the latch plate to the inside of the doorjamb. Don't over tighten your screws as this could cause damage to the strike plate.
If you're unsure whether the latch plate is in the correct position, close and open the door to check if it latches and closes correctly. If it doesn't then you'll have to adjust the strike plate upwards or down, or even forward or back, until the door closes and latches properly.
If the door is still moving or jiggles, then you may need to increase the size of your latch hole on the strike plate. This is more common on older doors. It can be caused by wear and tear, hinges that are too narrow, the wrong size latch or a damaged strike plate. If this is the situation, use a metal filing instead of a chisel, or hammer to adjust the strike plate.
Take off the Latch
The latch is the angled metal piece that is able to move between the hole in the inner edge of your door. When you turn the handle, it pushes the latch forward, allowing you to open the door. It also hooks into a hole in the door frame to keep the door closed. If your door shakes when you close it, changing the latch could be all that's needed to fix it.
The screws that hold the door latch are hard to spot however, you can use a screwdriver to make a small hole on the trim plate and then pry the latch off. After you've removed the trim plate, it will be easy to remove the latch and the bolts that keep the spindle and latch in the position.
If the latch isn't able to come out it is suggested to use the clip of a paper or tool to free it from the handle mechanism. Insert the item into the latch's slot that is recessed and gently move it around until you feel the latch and handle start to split. You may have to do this several times before the latch becomes loose enough to pull out.
You should be able slide the new latch into its slot without any problems after you have removed the old one. Make use of the new screws to secure the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot and aligned with the screw chambers.
Take note of the backset (the distance between the centre of the large hole on the front of the door and the edge) before installing the new handle. Also, make sure that the size of the latch on the new handle is in line with this measurement.
You'll require a brand new cylinder for your lock if you're replacing the latch and handle or if your current one is damaged. If you are not changing locks, a new lock should fit inside your existing recess, and will work with the keys you have already. Pick a latch that has rectangular cover plates to match the handles you have.
Remove the cover plate
Door handles may begin to look worn over time If you replace them with a contemporary lever on rose design it's a quick and easy DIY and decorating project that will improve the overall look of your home. You can purchase complete sets with matching the escutcheons as well as privacy adaptors and escutcheons.
The first step in replacing the door handle inside is to remove the cover plate or rose, which covers the screws and inner mechanism. Use a flathead for removing the cover plate. It could have an opening on one edge or be held by pins.
Remove the screw that holds the handle inside and set it aside once the cover plate is removed. Take off the screws that hold both the outer and inner plates. You can loosen them using a Philips Screwdriver. Take door handles repair near me and latch from the door. Place them aside.
Most doors have gaps between the jamb of the door and the inner edge of the frame, which allows for a handle, but not all do. If it doesn't, you'll need to drill a hole into the door to accommodate the new handle. The procedure to do this is the same as opening a door using a lock, but you'll have to be extra careful to avoid damaging the door or frame.
The installation of new door knob screws is necessary after the holes have been made. Buy the same size as the old screws to ensure that you don't get the handle that is too loose or tight. Installing a new strike rod and latch is also necessary. These are not included in most door handle sets.
If you're looking for a high-quality replacement for your interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's factory-fitted and has received hundreds five-star reviews. It's a great option for replacing worn or damaged door handle hardware inside your Chevy HHR.